5: Commands and Levels
Run iperf with command line parameters passed in quoted string.
Ping destination continuously with 5 second timeout
Ping destination n times with 5 second timeout
ping <host> <count> <timeout>
Ping destination n times with x timeout (in seconds)
Displays the last 20 commands entered during the current CLI
session.
Trace route to destination
trace route <host> <protocol>
Trace route to destination using TCP, ICMP, or UDP
rss (config-rss) level commands
Restores the default number of RSS feed entries.
Exits to the configuration level.
Sets the maximum number of RSS feed entries.
Disables RSS feed data persistence.
Enables RSS feed data persistence.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Display the RSS Feed status
Stores the current configuration in permanent memory.
security (config-profile-security:test1) level commands
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Restores the key type to the default value (passphrase).
Restores the security method (suite) to the default value (None).
Exit to the profiles level
Sets the key type to hex.
Sets the key type to passphrase.
Sets the passphrase. Maximum 63 characters.
<text> = put quotes around characters that make up the pass-
phrase.
Please refer to the other equipment’s manual to determine the
passphrase
input style recommended.
NOTE: Lantronix recommends using a passphrase of 20 charac-
PremierWave EN Command Reference 197
