A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
warding
it to the connect mode tunnel (generally used for debugging).
clrscrn
Clears the screen.
connect mode always
Enables the tunneling server to always establish tunneling con-
nections.
connect mode any character
Enables the tunneling server to establish a tunneling connection
when a
character is received on the corresponding line (serial port).
connect mode disable
Disables connect mode tunneling.
connect mode modem control asserted
Enables the tunneling server to make tunneling connections when
the modem
control pin is asserted.
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured start char-
acter
is received on the line.
cp output
Enters the next lower level.
default connect mode
Restores the default connect mode as "disable".
default host mode
Connects to the first host in the list that accepts the connection.
default local port
Uses a random port number as the local port for establishing tun-
neling
connections to other devices.
default reconnect time
Restores the default reconnect time value for connect mode tun-
neling.
default start character
Defaults the connect mode start character.
email connect <number>
Sets an email profile to use to send an email alert upon establish-
ing
a connect mode tunnel.
<number> = the number of the email profile to use.
email disconnect <number>
Sets an email profile to use to send an email alert upon closing
a connect mode tunnel.
<number> = the number of the email profile to use.
exit
Returns to the tunnel level.
flush serial disable
Characters already in the serial data buffer are retained upon es-
tablishing
a connect mode tunneling connection.
flush serial enable
Flushes the serial data buffer upon establishing a connect mode
tunneling
connection.
flush start character disable
Enables forwarding of the connect start character into the net-
work.
flush start character enable
Disables forwarding of the connect start character into the net-
work.
host <instance>
Enters the next lower level.
Specify the instance for the next lower level.
host mode sequential
Connects to the first host in the list that accepts the connection.
host mode simultaneous
Selects simultaneous connections to all hosts on the host list.
kill connection
Disconnects the active connect mode tunneling connection or
connections.
local port <number>
Sets a specific port for use as the local port.
<number> = the number of the port to use.
PremierWave EN Command Reference 64