5: Commands and Levels
Restores the default local port to the Telnet server.
Sets the maximum allowed concurrent incoming Telnet sessions.
<number> = number of sessions.
Sets the local port that the Telnet server uses.
<number> = local port number.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Displays the Telnet statistics.
Disables the Telnet Server.
Enables the Telnet Server.
Stores the current configuration in permanent memory.
terminal 1 (config-terminal:1) level commands
break duration <milliseconds>
Sets how long a break should last when it is being sent to the line.
<milliseconds> = number of milliseconds.
Restores the break duration to the default value (500 ms).
Sets the default terminal type, "UNKNOWN".
Disables echoing of characters received on the line back to the
line.
Enables echoing of characters received on the line back to the
line.
Exits to the configuration level.
exit connect menu disable
On the login connect menu, removes the menu item allowing the
user to exit
On the login connect menu, inserts the menu item allowing the
user to exit
Enters the line level.
<line> = number of the line (serial port) to be configured.
login connect menu disable
Disables the login connect menu, so a user will get the CLI imme-
diately
login connect menu enable
Enables the login connect menu, so a user will get the menu ra-
ther than the
CLI immediately after logging in.
Removes the configured send break character.
Shows the layout of the connect menu with current settings.
Sets the optional send break character.
<text> = the character.
The character may be input as text, control, decimal, or hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
PremierWave EN Command Reference 202
