A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
write
Stores the current configuration in permanent memory.
cp (email-cp:1) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
group <text>
Specify a CP group that shall trigger an email.
<text> = configurable pin group.
no group
Disables the trigger to send an email.
no trigger value
Clears the value that shall trigger an email.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
trigger value <number>
Specify a value of the CP group that shall trigger an email.
<number> = numeric value to watch for from the CP group. Can
be specified as
hex if prepended with “0x”.
write
Stores the current configuration in permanent memory.
cp output (tunnel-connect-cp_output:3) level commands
clrscrn
Clears the screen.
connection value <number>
Sets the value to output to the CP Group upon connect mode
connection.
<number> = binary to output (typically 1 or 0).
default connection value
Restores the default value for connect mode connection.
default disconnection value
Restores the default value for connect mode disconnection.
disconnection value <number>
Sets the value to output to the CP Group upon connect mode
disconnection.
<number> = binary to output (typically 1 or 0).
exit
Exits to the next higher level.
group <text>
Configures the CP Group to set upon making or breaking a con-
nect
mode connection.
<text> = CP Group.
no group
Removes the CP Set Group for connect mode.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
cp output (tunnel-accept-cp_output:3) level commands
clrscrn
Clears the screen.
connection value <number>
Sets the value to output to the CP Group upon accept mode con-
nection.
<number> = binary to output (typically 1 or 0).
default connection value
Restores the default value for accept mode connection.
default disconnection value
Restores the default value for accept mode disconnection.
disconnection value <number>
Sets the value to output to the CP Group upon accept mode dis-
connection.
<number> = binary to output (typically 1 or 0).
exit
Exits to the next higher level.
group <text>
Configures the CP Group to set upon making or breaking an ac-
cept
PremierWave EN Command Reference 70