319
Control systems
Voice Control troubleshooting
Problem Possible cause/consequence Suggested solution
Voice Control System does not recognize
commands.
You have not operated the system from the
driver’s seat.
̈ Operate the Voice Control System only
by the driver as the microphone is
geared to the driver side.
You have spoken unclearly, too loudly or
too quietly.
̈ Speak the commands in a continuous
manner using a normal tone.
A blower is set to the highest setting, vents
are pointed at microphones or wind noise is
being created through open windows.
̈ Avoid loud disturbances.
Voice Control System does not recognize a
address book entry.
The voice entries in the address book sound
too similar.
̈ When you create your address book en-
tries, select names with the greatest
possible acoustic differences: If for ex-
ample you have the names Smith and
Schmidt, choose for example “Smith
work” or “Schmidt John”.
̈ Speak the command “List phone book”.
The system reads out the address book
entry by entry.
̈ Press ! when the desired entry is
being read out.
The entry is selected and the corre-
sponding number is dialed
(
୴ page 284).
