377
Controls in detail
Power windows
Vehicles with SmartKey
̈ Aim transmitter eye of the SmartKey
towards the sensor in the driver’s door
handle. The SmartKey must be in close
proximity to the driver’s door handle.
̈ Press and hold button ‹ until the
side windows and the tilt/sliding sun-
roof are completely closed.
The vehicle is locked.
̈ Release button ‹ to interrupt pro-
cedure.
Vehicles with KEYLESS-GO*
1 Sensor surface on door handle
The SmartKey with KEYLESS-GO must be
located outside the vehicle within approxi-
mately 3 ft (1 m) of a door.
̈ Close both doors.
̈ Touch and hold sensor surface 1 until
the windows and the tilt/sliding sun-
roof are completely closed.
The vehicle is locked.
̈ Release sensor surface 1 to interrupt
procedure.
anyone being harmed by the closing pro-
cedure, press and hold button ‹.
Vehicles with KEYLESS-GO*:
ț Release the sensor surface on the out-
side door handle (
୴ page 377) to stop
the closing procedure.
ț Immediately pull on the same outside
door handle and hold firmly. The side
windows and the tilt/sliding sunroof will
open for as long as the outside door
handle is held but the door is not
opened.
i
Make sure that you are only touching the
sensor surface.
