A SERVICE OF

logo

Appendix H-Restoring Defaults and System Recovery
Polycom, Inc. H-3
5 In the Initial Setup Utility dialog box, click the Restore to Factory Security Defaults link.
The Restore to Factory Security Defaults dialog box is displayed.
6 Click OK.
7 Remove the USB key from the PC workstation.
8 Insert the USB key in any USB port of the RealPresence Collaboration Server 800s.
9 Turn off the RealPresence Collaboration Server 800s, then turn it on.
10 Start the RealPresence Collaboration Server Web Client application on the workstation.
a In the browser’s address line, enter the IP address of the Control Unit in the format:
http://<Control Unit IP Address>.
b Click Enter.