Sale Type Description
Use this function to select the transaction type. To enter the Sale Type
Setup:
1. Press BLUE + 4.
2. Key in the manager password.
3. Press the BLUE enter key.
4. Press Code 6.
Display Response
SALE TYPE DESC
<current value>
Press [ENTER] to leave unchanged, or key
in up to 7 alphanumeric characters and
press [ENTER] to change the name of the
transaction type for all Sale transactions.
Printer/PINpad Device Type
Use this function to enable/disable the printer and identify the type of PINpad
device you will be using. To enter the Printer/PINpad device setup:
1. Press BLUE + 4.
2. Key in the manager password.
3. Press the BLUE enter key.
4. Press Code 7.
Display Response
PRINTER / PINPAD
PRINTER? Y/N
This prompt appears if there is anything
stored in Memory Location 0950. Press [6]
for "N" to remove the printer and return to
the "ENTER SETUP CODE" prompt or press
[9] for "Y" to continue.
MERCHANT LOGO
LINE 1?
|
LINE 6?
Enter the merchant name and address using
up to 24 characters per line and up to 6
lines of information. If data is already
present, press [BACKSPACE], enter the
information, and press [ENTER], or
[BACKSPACE] and [ENTER] to leave the
field empty. If no data is present, key in data
and press [ENTER].
FLEX AGREEMENT
LINE 1?
|
LINE 6?
Enter up to 6 flexible agreement lines using
up to 24 characters per line. If data is
already present, press [BACKSPACE], enter
the agreement information, then press
[ENTER].
5. Programming the Terminal for Use
TRANZ 460 Terminal 5 - 7
