Clear Batch
Use this function to clear all transactions from an open batch. To enter the
Clear Batch Setup:
1. Press BLUE + 4.
2. Key in the manager password.
3. Press the BLUE enter key.
4. Press Code 9.
Display Response
CLEAR BATCH
CLEAR? Y/N
Enter [9] for "Y" to continue, or [6] for "N" to
return to the ENTER SETUP CODE prompt.
ENTER TO CONFIRM Press the [ENTER] key. The terminal clears
the batch and returns to the setup code
prompt.
Card Type
Use this function to enter the card type labels. To enter the Card Type Setup:
1. Press BLUE + 4.
2. Key in the manager password.
3. Press the BLUE enter key.
4. Press Code 0.
Display Response
CARD NAME
ENTER CARD TYPE
Enter a number, 1–10, to select the Card
Type to name.
<card name> The terminal displays the current value of
the card type. Enter a different card type, up
to eight characters, then press [ENTER].
Memory Map of
Important Locations
You can review your programming of the TRANZ 460 terminal by pressing
BLUE + 7, then keying in the desired field. See Section 4,
General
Programming
, for procedures to follow if you wish to review or change
selected fields. Refer to Appendix E,
ZONTALK 2000 Download Parameters
,
for specific download information pertaining to this application.
5. Programming the Terminal for Use
TRANZ 460 Terminal 5 - 9
