9 F-38251 (08-09) REV D
OPERATION
WARNING: THE RANGE AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING
THE RANGE.
CONTROLS (Fig. 6)
Model EV36 Shown
Fig. 6
Element Controls — Infinite load switches that control and maintain heat to the surface plates. The
controls are arranged in pairs; the left knob controls the front plate and the right
knob controls the rear plate. NOTE: On 480 volt units, French plates are controlled
with a 3-heat switch (HIGH = 2000 watts, MED = 1000 watts, LOW = 500 watts).
Hot Top Switch — (Not shown.) A thermostat (1-10) controls and maintains heat to the top section.
Select desired heat level, (1 is minimum, 10 is maximum).
Griddle Thermostat — (Not shown.) Regulates the amount of heat needed to maintain the set
temperature. Each 12" (305 mm) section of the griddle has its own thermostat with
a temperature range of 200°F (93°C) to 550°F (288°C).
Griddle Indicator Light — (Not shown.) Will be lit until the selected temperature is reached or when it is being
maintained.
Oven Thermostat — Regulates the amount of heat needed to control and maintain oven temperature
around the desired set temperature. The temperature range is from 200°F (93°C) to
550°F (288°C). Turn dial counterclockwise to increase temperature and clockwise to
decrease temperature.
Infinite Switch for Oven — Provides control for top browning element. Adjust as needed for the amount
Top Heating Element of top heat required in order to brown product as desired. NOTE: Infinite switch not
available on 480 volt units. This position on the panel will be filled with a panel
plug.
Oven Indicator Light — Will be lit until the selected temperature is reached or when it is being maintained.
Element Control
Knobs
Oven Infinite Switch
Knob
Oven Indicator Light
Oven Thermostat
Knob
