A SERVICE OF

logo

ANALOG CONTROL
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
Shut off the gas before servicing the
unit.
1. Open the door.
2. Unplug wiring harnesses from bottom of control
box.
3. Remove control box from frame of fryer.
4. Loosen set screw in control knob and remove
from shaft.
Fig. 10
5. Remove control box cover.
Fig. 11
6. Disconnect lead wires as necessary to remove
control.
Fig. 12
7. Remove screws from front of control panel and
remove control.
VK and TR GAS FRYERS W/Wo KleenScreen PLUS - REMOVAL AND REPLACEMENT OF PARTS
F45474 (0413) Page 10 of 55