A SERVICE OF

logo

Fig. 36
5. Reverse procedure to reinstall valve.
FILTER HOSE SWITCH (KSP)
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Open fryer door to access filter hose switch.
2. Unplug lead wire connections.
Fig. 37
3. Press tabs on rear of switch and push out front of
fry cabinet.
4. Reverse procedure to install new switch.
FILTER PUMP AND MOTOR
(KLEENSCREEN FRYERS ONLY)
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Access rear of fryer.
2. Remove four bolts holding serial plate bracket,
and carefully lower bracket.
3. Disconnect both hoses from filter pump.
VK and TR GAS FRYERS W/Wo KleenScreen PLUS - REMOVAL AND REPLACEMENT OF PARTS
F45474 (0413) Page 20 of 55