A SERVICE OF

logo

Fig. 31
4. Reverse procedure to install.
BASKET LIFT MOTOR
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove
BASKET LIFT TUBE.
2. Disconnect lead wires from cam switch and
basket lift motor.
3. Loosen set screws securing crank arm assembly
to basket lift motor shaft.
Fig. 32
4. Remove screws securing basket lift motor to cam
bracket, then remove motor from bracket.
Fig. 33
5. Reverse procedure to install and check for proper
operation.
NOTE: After reinstalling motor keep all wire leads
clear from moving parts.
VK and TR GAS FRYERS W/Wo KleenScreen PLUS - REMOVAL AND REPLACEMENT OF PARTS
F45474 (0413) Page 18 of 55