A SERVICE OF

logo

Chapter 34 DHCP
GS1920 Series User’s Guide
274
Figure 198 DHCP Relay Configuration Example
34.5 Configuring DHCPv4 VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP clients.
Click IP Application > DHCP > DHCPv4 in the navigation panel, then click the VLAN link In the
DHCP Status screen that displays.
Note: You must set up a management IP address for each VLAN that you want to
configure DHCP settings for on the Switch.
EXAMPLE