A SERVICE OF

logo

Chapter 6 Tutorials
GS1920 Series User’s Guide
50
Figure 36 Tutorial: DHCP Relay Scenario
6.3.2 Creating a VLAN
Follow the steps below to configure port 2 as a member of VLAN 102.
1 Access the web configurator through the Switch’s management port.
2 Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the
settings to the run-time memory.
Figure 37 Tutorial: Set VLAN Type to 802.1Q
3 Click Advanced Application > VLAN > Static VLAN.
VLAN 102
DHCP Server
Port 2
PVID=102
172.16.1.18
A
192.168.2.3