GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 242
Note: The write memory command is not available in User mode.
You must save your changes after each CLI session. All unsaved configuration
changes are lost once you restart the switch.
40.8.1 Logging Out
In User mode, enter the exit or logout command to log out of the CLI.
40.9 Command Summary
The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User’s Guide for more background
information.
40.9.1 User Mode
The following table describes the commands available for User mode.
Table 93 Command Summary: User Mode
COMMAND DESCRIPTION
enable
Accesses Enable (or privileged) mode. See Section 40.9.2
on page 243.
exit
Logs out from the CLI.
help
Displays help information.
history
Displays a list of previously command(s) that you have
executed. The switch stores up to 256 commands in
history.
logout
Exits from the CLI.
ping <IP|host-name>
[<in-band|out-of-
band|vlan <vlan-id>]
[size <0-1472>]
[-t]
Sends a Ping request to an Ethernet device.
help
Displays help information for this command.
show hardware-monitor <C|F>
Displays current hardware monitor information with the
specified temperature unit (Celsius C or Fahrenheit F).
ip
Displays IP related information.
system-information
Displays general system information.
ssh <1|2> <[user@]dest-ip>
Connects to an SSH server with the specified SSH version.
