A SERVICE OF

logo

GS-4012F/4024 User’s Guide
271 Chapter 41 Command Examples
Figure 163 show interface Command Example
41.2.6 show mac address-table
Syntax:
show mac address-table <all <sort>|static>
Where
<sort> = Specifies the sorting criteria (MAC, VID or port).
This command displays the MAC address(es) stored in the switch. The following example
shows the static MAC address table.
ras# show interface 2
Port Info Port NO. :2
Link :100M/F
Statuss :FORWARDING
LACP :Disabled
TxPkts :2778
RxPkts :2043
Errors :0
Tx KBs/s :0.0
Rx KBs/s :0.0
Up Time : 4:29:36
TX Packet Tx Packets :2778
Multicast :0
Broadcast :542
Pause :0
Tagged :0
RX Packet Rx Packets :2043
Multicast :0
Broadcast :256
Pause :0
Control :0
TX Collison Single :0
Multiple :0
Excessive :0
Late :0
Error Packet RX CRC :0
Length :0
Runt :0
Distribution 64 :2355
65 to 127 :463
128 to 255 :435
256 to 511 :593
512 to 1023 :154
1024 to 1518 :821
Giant :0
ras#