GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 244
<port-num>
Removes all learned MAC address on the
specified port(s).
no logging
Disables syslog logging.
ping
<IP|host-
name>
Sends Ping request to an Ethernet
device.
[vlan <vlan-id>][..]
Sends Ping request to an Ethernet device
in the specified VLAN(s).
reload config <index>
Restarts the system and use the specified
configuration file.
show classifier
Displays all classifier related information.
[name]
Displays the specified classifier related
information.
cluster
Displays cluster management status.
candidates
Displays cluster candidate information.
member
Displays the MAC address of the cluster
member(s).
members config
Displays the configuration of the cluster
member(s).
member mac <mac-
addr>
Displays the status of the cluster
member(s).
dhcp relay
Displays DHCP relay settings.
server
Displays DHCP server settings.
server <vlnd-id>
Displays DHCP server settings in a
specified VLAN.
diffserv
Displays general DiffServ settings.
ga rp
Displays GARP information.
hardware-monitor <C|F>
Displays current hardware monitor
information with the specified temperature
unit (Celsius C or Fahrenheit F).
https
Displays the HTTPS information.
certificate
Displays the HTTPS certificates.
key <rsa|dsa>
Displays the HTTPS key.
session
Displays current HTTPS session(s).
timeout
Displays the HTTPS session timeout.
igmp-filtering profile [name]
Displays IGMP filtering profile settings.
igmp-snooping
Displays global IGMP snooping settings.
interface <port-
number>
Displays current interface status.
interfaces config
<port-list>
Displays current interface configuration.
Table 94 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
