GS-4012F/4024 User’s Guide
Chapter 41 Command Examples 280
Figure 179 interface Command Example
41.8.3 bpdu-control
Syntax:
bpdu-control <peer|tunnel|discard|network>
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the BPDU control to
tunnel, to forward BPDUs received on ports one, three, four
and five.
Figure 180 interface bpdu-control Command Example
41.8.4 broadcast-limit
Syntax:
broadcast-limit
broadcast-limit <pkt/s>
ras# config
ras(config)# interface route-domain 192.168.1.1/24
cmd interface route domain
192.168.1.1 255.255.255.0
ras(config-if)#
peer|tunnel|discard|network>
= Type peer to process any BPDUs received on
these ports.
Type
tunnel to forward BPDUs received on
these ports.
Type
discard to drop any BPDUs received on
these ports.
Type
network to process and forward BPDUs
with a VLAN tag and to process untagged
BPDUs.
ras(config)# interface port-channel 1,3-5
ras(config-interface)# bpdu-control tunnel
ras(config-interface)#
