Filter
Top Products
Menus 127
By scrolling to a particular group of WAP server settings that you
wish to modify, and then pressing (Option), you can create a
new group of settings, edit the settings, or delete the settings.
WAP server settings include the fields listed below. Press (Edit)
to edit the setting in each field. When you are finished with the
settings for all fields, you must press in order for this group of
WAP server settings to be saved.
• Profile Name: Gives the WAP server settings a name.
• Homepage: Sets the webpage that the browser will link to when it
is started up. After you enter this item, key in the URL for the
webpage that you would like to use as the homepage
— for
example, http://wap.yahoo.com.
• IP Address: Enter the IP address used for accessing the mobile
Internet.
• Port: Enter the connection port specified by the network operator
— for example, 9201.
• Bearer Mode: Before connecting to the Internet, you must set this
item according to whether your Internet connection bearer mode
is a GPRS network system or a GSM dialup network. Doing so
will allow you to properly link to the data network to browse WAP
pages, download Java programs, and so forth. If you are using a
GPRS network, you can use both the GPRS and dialup network to
connect to the Internet. If, however, you are using a dialup
network, you are restricted to using only the dialup network to
connect to the Internet.
GPRS/CSD: Use the GPRS network preferentially. Only if
there is no GPRS network present will the dialup network be
used.
GPRS: Use only the GPRS network.