Filter
Top Products
91
Before charging, please confirm that the electrical plug is
correctly plugged into the power socket. If the electrical socket is
not correctly plugged in, it could lead to electric shocks, or fire or
explosions of the phone or battery. When charging is complete and
power is turned off, pull out the plug rather than pulling out the cable.
The charger must use the standard required current and voltage,
if other voltages are used it could lead to fire or breakages.
The power cable of the charger should not have heavy objects
placed on it. It should not be damaged, modified, or pulled, otherwise
it could cause electric shocks or fires.
Please do not touch the plug, cable, charger with wet hands when
it the phone is charging. Otherwise it could lead to an electric shock.
To avoid overheating, fire or other breakages, if objects like
water get into the charger, please immediately remove the charger
cable plug from power socket.
Using the USB Data Cable
When using the USB data cable, please operate strictly following
the instructions as below. Otherwise, it could damage or phone or
personal computer:
When using the USB data cable to connect the phone with the
personal computer, please first connect the phone end, and then
connect the personal computer end.
When the phone and computer are communicating, it is strictly
forbidden to disconnect the USB cable. Otherwise, it could cause
the phone and computer equipment to be damaged.
When disconnecting the phone and computer's USB connection,
please first disconnect the computer end, and then disconnect the
phone end connection.