Filter
Top Products
94
18 SAR Description
Specific Absorption Rate (SAR)
This cell phone conforms to International SAR standards.
Your cell phone is a low power wireless receiver and transmitter.
It is designed and manufactured not to exceed the recommended
upper SAR International standard values. These upper values are
within the scope of the national standard. This standard stipulates
the permitted SAR values for the general public. The standard
was formulated after careful research by international independent
scientific organizations. These organizations also carry out regular
reviews of the standards to ensure their effectiveness. The standards
include a large number of safety parameters to ensure the personal
health and safety of users of any age.
The phone's emissions are measured and evaluated according to their
SAR (Specific Absorption Rate). Based on the standard, the upper
recommended SAR value for this cell phone is 2.0W/kg per 10g*.
The testing of the SAR values of this cell phone is carried out using
a standardized testing program. This tests the highest power output
for all frequency bands during regular usage.
Although the SAR is tested at maximum power, in reality the
SAR values are considerably lower than the maximum values
during regular use. This is because the cell phone is designed with
a number of output powers. During regular operation, the power
rating required need only be enough to allow the phone to connect
to the network. Usually the closer the phone is to the base station,
the lower the output power needs to be.