Filter
Top Products
25
iii) Group IDs can be dedicated to a specific line.
Only those handsets subscribed to a
particular group can access this specific line.
d. Records main greeting message.
e. Playbacks main greeting message.
f. When AA turned on, select from the following two
options:
i) Set Operator Handset ID: all calls addressed
to the operator will be routed to this specific
handset ID.
ii) When EP-490 is linked behind the PBX
system (with analog module or D/A
converter,) the call can be routed back to a
wired PBX extension. To perform this feature,
the correct feature codes (up to 10 digits)
must be set up properly. Please refer to page
45 for detail description.
2. System Configuration
a. Removes Handset ID from the base station.
b. Set next Handset ID to be assigned.
i) Dial mode (tone/ pulse), default = tone.
ii) Flash time (100ms- 900ms), default = 600ms.
26
Charger Illustration