Filter
Top Products
31
Basic Operations
Making a Telephone Call
1. Press TALK, wait for dial tone, and then enter phone
number.
2. Alternatively, you can enter phone number first then
press TALK key. When using this method to dial out,
you can use the Clear (Left) and Delete (Right) soft keys
to edit the number entered. “Delete” erases the last digit
entered. “Clear” erases the entire line but remains in the
dialing mode.
3. To abort dialing, press END key.
Notes:
1. The Base Station will automatically search for an
available line and dial out. If Line Selection option
has been enabled, the handset will be prompted
to select from a list of available lines.
2. If all 4 lines are occupied, including if some lines
are made unavailable to all handsets (lines can
be dedicated to only certain handsets, see Auto-
Attendant Operations), the LCD shows “No Line
Available” and handset returns to standby mode.
3. If a link cannot be established, the LCD will show
“No Base” after a 12-second time out.
4. A call duration timer will start displaying the length of
the call after link is established (regardless if and
when the call is answered).
Making an Intercom Call
1. Press Intercom key followed by a two-digit handset ID or
Group ID.
32
2. To abort dialing, press END key.
Notes:
1. Intercom calls can be made regardless if the Base
Station is present.
2. If a Group ID is entered, the first handset (belonging
to that group) that answers will establish a link with
the caller. See Handset Group Subscription.
3. If a link cannot be established, the LCD shows “No
Connection” after a 12-second time out.
Redial
1. Press REDIAL (Left) soft key.
2. The LCD shows the last phone number dialed. To dial
this number, press DIAL (Left) soft key.
3. Use Up or Down Arrow Key to scroll through the last 10
phone numbers dialed. Select and press DIAL soft key.
Notes: Intercom numbers (Handset ID) are not stored in
the last 10 numbers dialed log.
Receiving a Telephone Call
1. When an incoming call arrives, the ringer will ring or
vibrate unless the ringer has been turned off.
2. If the handset is on the charger cradle (ringer will be
temporarily switched to “Ring” if it has been set to
“Vibrate”), lift the handset and start conversation.
3. If the handset is not on the cradle, press any key (except
PWR, END, and the Silent soft key) to answer.
Notes: