Ericsson A1018 Cell Phone User Manual


 
Not for Com
mercial
Use
E
r
i
cs
s
on M
obile Com
m
unicat
i
ons
A
B
10 Turning Your Phone On and Off
Turning Your Phone On
and Off
Press and hold the NO (ON/OFF) key until you hear a click.
If Enter PIN Appears in Display
Some SIM cards are protected with a PIN code. If
Enter PIN
appears in
the display after you have turned on the phone, do this:
1. Enter your PIN. If you make a mistake while entering your PIN,
erase the wrong digit by pressing the
CLR key.
2. Press
YES.
Note! If your PIN is entered incorrectly three times in a row, the SIM
card is blocked. You can unblock it by using your PUK, see “Security
for Your Phone and Subscription” on page 44.
Network Search
After you have turned on the phone (and entered your PIN), the Eric-
sson logo appears in the display and the phone searches for a net-
work.
When a network is found, the phone beeps three times. The indicator
light on the top of the phone flashes green once every second and
your network operator’s name (in most cases abbreviated) appears in
the display.
This is called standby mode. You can now make and receive calls.
The first time you turn on your phone, you may want to change the
language in the display, choose the ring signal type and set the clock.
For more information about these settings, see “Personalizing
Your Phone” on page 29.
Display Language
Most modern SIM cards automatically set the display language to the
language of the country where you bought your SIM card. If this is
TURNING YOUR PHONE ON
INITIAL SETTINGS
Enter
PIN
Enter
PIN
****
Network
00:00