Filter
Top Products
Not for Com
mercial
Use
E
r
i
cs
s
on M
obile Com
m
unicat
i
ons
A
B
30 Personalizing Your Phone
You can choose the type of ring signal from a list of different sounds
and melodies. You can also compose a melody of your own by enter-
ing notes with the keypad (see “Your Own Ring Signal” on page 30).
To choose one of the ring signal types
1. Scroll to
Settings
, YES,
Ring type
, YES,
Phone
, YES.
2. Scroll until you find the ring signal type that you want.
3. When you reach the ring type you want, select it by pressing
YES.
Different Ring Signals for Line 1 and Line 2
If you subscribe to the Alternate Line Service (ALS),
L1
or
L2
,
depending on the line in use, is displayed instead of
Phone.
This
means that you can set different ring signals for the two lines.
Different Ring Signals for Speech, Data and Fax Calls
If you have turned the
Data menus
on (see “Sending and Receiving
Faxes” on page 65), you can set different ring signals for speech (the
display shows
Phone
,
L1
or
L2
), fax and data calls respectively.
You can compose your own ring signal.
To compose a ring signal
1. Scroll to
Settings
, YES,
EditMelody
, YES.
2. Press
CLR to clear the display.
3. Use the keypad to enter notes.
The keypad now works as a keyboard (see figure in margin):
• Press and hold a key to enter a long note.
• Press 0 to raise the note one octave.
4. To listen to your melody, press
YES.
Press
YES again to save it or press NO to continue editing.
You can reset some settings to their default values. If you do so, the
following settings are affected:
• all settings in the
Settings
menu, except your own ring signal
melody,
• the ring signal volume,
• the earpiece volume and the handsfree speaker volume,
• the alarm function in the
Set alarm
menu is turned off,
• the
Area Info
in the
Mail
menu is turned off.
RING SIGNAL TYPE
YOUR OWN RING SIGNAL
RESET
Settings
< Ring type >
(Mix)
Ring type
<Mix>
Ring type
<Line 1 >
(Mix)
B