Kyocera K126C Cell Phone User Manual


 
User Guide for the Kyocera K126C Phone v
Resetting the phone
If the screen seems frozen and the keypad does not
respond to keypresses, reset the phone by completing
the following steps:
1 Remove the battery door.
2 Remove and reinstall the battery
(see “Installing the battery” on page 1).
If the problem persists, return the phone to the dealer
for service.
Accessories
Use only Kyocera-approved accessories with Kyocera
phones. Use of any unauthorized accessories may be
dangerous and will invalidate the phone warranty if said
accessories cause damage or a defect to the phone.
To shop online for phone accessories, visit
www.kyocera-wireless.com/store.
To order by phone, call 800-349-4188 (U.S.A. only) or
858-882-1410.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver. When
it is on, it receives and sends out RF energy. Your service
provider’s network controls the power of the RF signal.
This power level can range from 0.006 to 0.6 watts.
Hearing Aid Compatibility (HAC) with Mobile Phones
Some mobile phones and hearing devices (hearing aids
and cochlear implants), when used together, result in
buzzing, humming, or whining noises detected by the
user. Some hearing devices are more immune than
others to this interference noise, and phones also vary in
the amount of interference they generate.
The wireless telephone industry has developed ratings
for some of their mobile phones to assist hearing device
users in finding phones that may be compatible with their
hearing devices. Not all phones have been rated.
Phones that are rated have the rating on their box or a
label on the box. The ratings are not guarantees, and
results will vary depending on the user’s hearing device
and hearing loss. If your hearing device happens to be
vulnerable to interference, you may not be able to use a
rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
M-Ratings— Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
to hearing devices than phones that are not labeled. M4
is the better/higher of the two ratings.
T-Ratings— Phones rated T3 or T4 meet FCC requirements
and are likely to be more usable with a hearing device’s
telecoil (“T Switch” or “Telephone Switch”) than unrated
phones. T4 is the better/higher of the two ratings. (Note
that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to
this type of interference. Your hearing device
manufacturer or hearing health professional may help
you choose the proper rating for your mobile phone. The
more immune your hearing aid is, the less likely you are
to experience interference noise from mobile phones.
For more information about hearing aid compatibility, visit
the FCC's Consumer & Governmental Affairs Bureau
Web site at
www.fcc.gov/cgb/dro.
82-G1858-1EN.book Page v Tuesday, April 3, 2007 11:41 AM