Filter
Top Products
User Guide for the Cyclops Phone 1
1GETTING ST ARTED
Installing the battery
Your Cyclops phone comes with a removable
lithium ion (LiIon) battery.
Fully charge the
battery before using the phone
.
To install the battery:
1. Hold the phone
face down.
1. Place your thumb on the
ribs at the top of the
battery door and slide the
battery door downward to
remove it
2. Place the battery in the
phone casing with the
metal contacts facing
towards the bottom end
of the phone.
3. Replace the battery door
by sliding the notches into
the openings at the
bottom and outside edges
of the battery casing.
4. Slide the door up to secure the cover
into place.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter to
the jack on the bottom of
the phone. Do not force
the AC adapter into the
jack. Make sure the
arrow is face up
as shown.
2. Plug the adapter into a wall outlet.
The battery icon in the upper right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Note: The battery will not charge if you use the
phone while it is connected to an AC adapter.
Note: You must use a Kyocera-authenticated
battery in your phone. If you attempt to use a
battery that has not been authenticated you will
receive a security warning. Contact Virgin Mobile
to obtain a Kyocera-authenticated battery.