Filter
Top Products
50 Voice features
Digit lengths
You can set the number of digits used for a phone
number in your voice dial list.
Select
Menu > Settings > Voice Features >
Digit Lengths and one of the following:
•
North American allows 7, 10, and 1 +
10 digits in a phone number.
•
Permit All allows 4-14 digits in a
phone number.
Voice answer
You can set your phone to answer a call
automatically when using a headset.
Enable voice answer
Select Menu > Settings > Voice Features >
Voice Answer > With Accessory. To use the voice
answer feature, you must disable the Auto-Answer
feature (see “Auto-answer” on page 51) and set
the phone to normal sounds (see “Ringer mode”
on page 48).
Use voice answer
When you receive an incoming call, the phone
prompts you with a voice recording. If the caller
is recognized as a contact entry in your phone,
then the phone prompts “Incoming call from
(Name), answer?” Say “Yes” or press any key
except the
End key to answer. Say “No” and press
the
End key to silence the alert. Remain silent.
The voice alert repeats twice and the phone rings
once, then returns to the home screen.
Voice wake-up
You can set your phone to make a call using
a headset.
Enable voice wake-up
Select Menu > Settings > Voice Features >
Voice Wake-Up > With Accessory.
Use voice wake-up
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear
two tones.
If the phone does not recognize your Wake Up
command, see “Voice training” on page 50.
Voice training
If your phone is having trouble recognizing
your voice, you can train by speaking
numbercommands.
1. Select
Menu > Settings > Voice Features >
Voice Training.
2. Read the message and select OK.
3. Select Train Numbers.
4. Read the message and select OK.
5. Follow the prompts displayed on the
screen. Speak each number until training
is complete.
To untrain your phone select
Menu > Settings >
Voice Features > Voice Training > OK >
Untrain Numbers.
82-K8216-1EN.book Page 50 Monday, September 22, 2008 2:27 PM