Filter
Top Products
User Guide 55
13 Voice Commands
Voice commands allow you to call a contact, dial
a phone number, access menus, or find contact
information from your voice dial list.
Note: You cannot use voice recognition to end
a call; you must press the
End key when the flip
is open.
Voice dial list
To call or find a contact using voice dial you
must add the contact to your voice dial list.
The contact name must not have more than
three words or components in a contact name
for voice dialing recognition.
Add contacts
To add a contact to your voice dial list:
1. Select Menu > Contacts > Voice Dial List.
2. At the contact list, highlight a contact
and press the
OK key. A check mark
appears next to a name when voice
dialing is active. Check each name you
wish use with voice dialing.
3. Select
Save.
Remove contacts
To remove a contact from your voice dial list:
1. Select Menu > Contacts > Voice Dial List.
2. At the contact list, highlight a check marked
contact and press the
OK key. No check
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
wish removed from voice dialing.
3. Select
Save.
Voice commands
Start voice commands
1. From the home screen, press the Send key to
initiate voice commands. The phone
prompts, “Say a command”.
2. Say one of the following commands and
following the voice prompts.
– “
Contact <name>” call to a contact on
your voice dial list.
– “
Dial Number <number>” call by
speaking the digits of the phone number.
– “
<shortcut name>” sends you to a
menu item.
– “
Find Contact” allows you to find a
contact from your voice dial list.
82-K8216-1EN.book Page 55 Monday, September 22, 2008 2:27 PM