LG Electronics E610 Cell Phone User Manual


 
30
You can also touch the Security menu
to configure the network with Wi-Fi
Protected Access 2 (WPA2) security
using a pre-shared key (PSK).
If you touch the WPA2 PSK security
option, a password field is added to
the Configure Wi-Fi hotspot dialogue
box. If you enter a password, you will
need to enter that password when you
connect to the phone's hotspot with a
computer or other device. You can set
Open in the Security menu to remove
security from your Wi-Fi network.
Touch Save.
ATTENTION!
If you set the security option as Open,
you cannot prevent unauthorised usage
of online services by other people and
additional charges can be incurred.
To avoid unauthorised usage, you are
advised to keep the security option
active.
Using the Wi-Fi Cast
You can share your music, pictures and
video content with users who use Android
Phones connected via the same Wi-Fi & Wi-
Fi Directed network.
Check your Wi-Fi & Wi-Fi Directed network
in advance and make sure the users are
5
connected to the same network.
Touch > Apps tab > Settings >
More from the WIRELESS & NETWORKS
tab > Wi-Fi Direct
Touch the Wi-Fi direct checkbox to turn
it on.
Select a device to connect from the
scanned device list.
Touch Connect.
Enabling Wi-Fi Direct to share
through SmartShare
Wi-Fi Direct automatically scans nearby Wi-
Fi Direct devices and the searched devices
are listed as they are found so you can
select a specific device to share multimedia
data with through Smart Share.
NOTE: Wi-Fi Direct cannot be enabled
while using other Wi-Fi functions.
Touch > Apps tab > Settings >
More from the WIRELESS & NETWORKS
tab > Wi-Fi Direct.
Select a device to connect from the
scanned device list.
CREATE GROUP – Touch to activate group
owner mode, which enables the legacy Wi-Fi
devices to connect by scanning your phone.
In this case you must enter the password
that is set in Password.
1
2
3
4
1
2
Connecting to Networks and Devices