Filter
Top Products
111
01
02
03
04
05
06
07
08
Settings
My address - Show your
Bluetooth address.
Pairing with another
Bluetooth device
By pairing your KC910 and another
device, you can set up a passcode
protected connection. This means
your pairing is more secure.
1 Check your Bluetooth is On and
Visible. You can change your
visibility in the Settings menu.
2 Touch Search.
3 Your KC910 will search for devices.
When the search is completed
Refresh will appear on screen.
4 Choose the device you want to
pair with and enter the passcode,
then touch OK.
5 Your phone will then connect to
the other device, on which you
should enter the same passcode.
6 You passcode protected
Bluetooth connection is now
ready.
Using a Bluetooth headset
1 Check your Bluetooth is On and
Visible.
2 Follow the instructions that came
with your headset to place your
headset in pairing mode and pair
your devices.
3 Touch Ask always or Allow
without ask and touch Yes to
Connect now Your KC910 will
automatically switch to Headset
profile.
TIP! See page 27 for details on
BT answer mode so that you
can control how you answer
calls when your Bluetooth
headset is connected.