Filter
Top Products
Using Your Phone’s Battery and Charger
Battery Capacity
Your Sprint PCS Vision Phone is equipped with a Lithium Ion (LiIon)
battery. It allows you to recharge your battery before it is fully
drained. The battery provides approximately 2.5 hours of
continuous digital talk time or approximately 8 days of continuous
digital standby time.
When the battery reaches 5% of its capacity, the battery icon blinks.
When there are approximately two minutes of talk time left, the
phone sounds an audible alert and then powers down.
Installing the Battery
To install the LiIon battery:
ᮣ
To install, insert the battery into the opening on the back of the
phone and gently press down until the latch snaps into place.
Removing the Battery
To remove your battery:
1. Make sure the power is off so that you don’t lose any stored
numbers or messages.
2. Press the battery release latch up and remove the battery from
the phone at a 45-degree angle.
Tip:
Be sure to watch your phone’s battery level indicator and charge the
battery before it runs out of power.
Note:
Long backlight settings, searching for service, vibrate mode, and
browser use affect the battery’s talk and standby times.
Section 2A: Your Sprint PCS Vision Phone – The Basics 16