Filter
Top Products
- 142 -
LGE Internal Use Only Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
12.AUTO CALIBRATION
XZZVXZZ
11. AUTO CALIBRATION
12.5 AGC
This procedure is for Rx calibration.
In this procedure, We can get RSSI correction value. Set band EGSM and press Start button the
result window will show correction values per every power level and gain code and the same
measure is performed per every frequency.
12.6 APC
This procedure is for Tx calibration.
In this procedure you can get proper scale factor value and measured power level.
12.7 ADC
This procedure is for battery calibration.
You can get main Battery Config Table and temperature Config Table will be reset.
12.8 Target Power
29dBm29dBm29dBmMax power
1909.8 MHz1880 MHz1850.2 MHzFrequency
810661512Channel
PCS 1900
29.5dBm29.5dBm29.5dBmMax power
1784.8 MHz1747.6 MHz1710.2 MHzFrequency
885699512Channel
DCS1800
32.3dBm32.3dBm32.3dBmMax power
914.8 MHz897.4 MHz880.2 MHzFrequency
12437975Channel
EGSM 900
32.3dBm32.3dBm32.3dBmMax power
848.8 MHz836.8 MHz824.2 MHzFrequency
251191128Channel
GSM 850
HighMiddleLowDescriptionBAND