SWITCHING ON
³ If your phone has an extendable antenna, extend
the antenna fully.
· Press and hold the ON key.
The phone will carry out a short self-
test, briefly displaying the ‘wake-up’
message. (This message is pro-
grammed by your dealer, but you
may change it if you wish; refer to
‘Changing the wake-up message’,
page 27, for further details).
When the
ON
indicator appears, the phone is ready for
use.
If the
NO SVC
indicator remains on, then you may be
outside the cellular service area, and will not be able
to make or receive calls.
Remember, to make or receive any calls, your
phone must be switched on and in service.
If you are using the SID function (refer to ‘SID Screen
(Menu 18)’, page 46, for details):
When SID is switched on, and specific carriers are not
available in your area, then the
NO
part of the
NO SVC
indicator may flash; in this instance you may be able to
make emergency calls, but will not be able to make or
receive any calls.
As with any other radio-transmitting devices, avoid
prolonged contact with the antenna when the phone
is switched on.
SWITCHING OFF
³ Press and hold the ON key.
The display will become blank.
If the charger is connected, the
B
indicator will remain
on, and charging will continue.
NOTE: Switch off the phone before removing the
battery.
10