Filter
Top Products
Notes:
If NO SVC is displayed:
You are outside the cellular service area.
If
NOT ALLOWED
is displayed:
The call is not allowed or your phone is locked.
(Refer to ‘Call Barring (Menu 14)’, page 41 and ‘Lock
phone (Menu 0)’, page 32).
If the signal is poor:
The quality of your call depends on the signal strength
of the cellular signal in your
area. The signal strength
indicator on the display (‘S‘ in
diagram right) shows received
signal strength. The more bars
showing, the stronger the
signal.
If the signal is poor, try moving to a different position.
If you are using the phone in a building, you may find
that reception is better near a window.
To adjust the earpiece volume:
On the side of the phone, press ∆ to increase the vol-
ume (maximum level is 5) or ∇ to decrease the volume
(minimum level is 1). The volume level you select is
displayed. If you try to adjust the volume below level 1,
or above level 5, the phone gives a warning beep.
If you are using the handsfree option, the handsfree
volume is adjusted. The volume levels for the phone,
and handsfree option, are stored independently.
ACTIVATING PIN CALLS
This function allows you to activate or deactivate the
PIN call. When this function is set to on, the PIN code
is requested at the call setup.
To activate the PIN call:
³ Enter the control code
*
, #, 7, 4, 6, 2, 2, 5, 5, #
(spells
*
# PIN CALL #).
The phone prompts for your four-digit
PIN CODE?
· Enter your PIN code and press STO.
ON
S
B
IN USE
12