Filter
Top Products
33
If you make a mistake when locking or unlocking the
phone, the message
CODE ERROR
will be displayed.
In this instance, start again from the beginning.
On entering the correct lock code:
– When locking the phone, the message
LOCKED
will
be displayed, and will remain to remind you that the
phone is locked.
– When unlocking the phone, the message
UNLOCKED
will appear briefly.
For other options, which provide more-selective
restrictions, you may use the Call Barring function
(Menu 14), page 41, or the Memory lock function
(Menu 15), page 42.
System Select (Menu 1)
Each cellular service area can have two cellular
service suppliers, called carriers. One carrier operates
the ‘A’ system, and the other carrier operates the ‘B’
system (these systems are generally known as
‘non-wireline’ and ‘wireline’, respectively). Your phone
is designed to work with both carriers.
This menu function allows you to program your phone
for optimum operation when in your home service
area or when away from your home area (this is called
roaming). You may select any of the following roaming
modes:
System A NAM System B NAM
Selected* Selected*
HOME AREA HOME AREA
The phone uses only the
home area and home system.
BOTH SYSTEMS BOTH SYSTEMS
The phone uses either sys-
tem A or B, whichever is the
stronger signal.
HOME TYPE A HOME TYPE B
The phone uses only the
home system.
NON-HOME NON-HOME
The phone uses only the
TYPE B TYPE A
non-home system.
*The home system depends on the current NAM
selection; refer to ‘NAM Select (Menu 7)’, page 37.