Filter
Top Products
23
DISPLAYING ‘HIDDEN’ NUMBERS
The phone will display up to 16 digits at a time. If you
enter a number longer than this, the first digits will
disappear off the side of the display. If you type more
than 32 digits, the first digits will be lost.
³ To view the ‘hidden’ digits press and hold RCL.
· To view the original display again, release RCL.
Having displayed a long number, remember to clear
the display (press and hold CLR) before attempting
to recall information from a memory location (as the
RCL key is dual function, and will not recall memory
locations while a number longer than 16 digits is
being displayed).
CLEARING THE CONTENTS OF A
MEMORY LOCATION
NOTE:
Once deleted, the contents of a memory
location cannot be recalled.
³ Press and hold CLR to clear the display.
· Press STO. The message
STORE
prompts you to
specify a memory location number.
» Enter the number of the memory location you want
to delete. The message
REPLACE CONTENT?
will appear.
¿ Press STO (within 8 seconds). The message
STORED
and the memory location number will
be displayed briefly, confirming that the memory
location has been cleared. If you do not press
STO within 8 seconds, or if you press CLR, the
message
STORE NOT DONE
will be displayed,
and the contents of the location will not be cleared.
MOVING THE CONTENTS OF A MEMORY
LOCATION
You may move the name and number stored in one
location to any empty location. If you attempt to move
the contents of a location which contains only a num-
ber (i.e. the name part is empty), the number will be
copied, rather than moved.