Filter
Top Products
Write text
The input methods provided
in the device may vary
according to different sales markets.
Input method indicators
The input method indicator
is shown in the navigating
field or on the upper right corner of the inputting
frame.
Please note that not all input methods are available under
all circumstances. Press *
to view other available input
methods.
Default input method
Please notice that aiming fo
r different requirements for
various characters' input posi
tions, the device has preset
the relevant default input methods and usable input
methods. For the input posit
ions where the default input
method is Pinyin, you coul
d change into other input
method as default when necessary.
Press
, and select
Tools >
Settings >
General >
Personalisation
> Language
>
Default input. This
selection is only visible when you select a Chinese
language in the writ
ing language setting.
Switch input methods
Press * to select desired input method from the selection
list (the currently the active input method is not list
ed).
Press
# repeatedly to switch
among different character
modes.
Pinyin input method
Pinyin symbols are mapped to number keys. You can press
the corresponding number key once regardless of the
intended symbol’s position
on the key. The device will
make logical combinations
and display all feasible
matches to those Pinyin symbols you just pressed.
Use Pinyin input method
1 Input Pinyin symbols and tones: Press numbe
r key
once for each Pinyin symbol you want to input (use
"v"
for "ü"); When you start to input, Chinese input
window will be shown on the screen: It shows all the
Pinyin letter combinations matching to the keys you
pressed; and the candidate Chinese characters
corresponding to the highlighted Pinyin. The Pinyin
letters displayed on the screen are changing
frequently during your inputting process. Ignore th
ese
changes before you finish inputting the last Pinyin
letter.
After inputting all Pinyin letters, you can also press
*
to input tones. Press
* once to input the first tone,
twice to input the second tone, and so on. Press
* five
times to input the neutral tone.
Tip:
Press the right selection
key to close the Chinese
input window.
2 Select desired Pinyin: When several Pinyin letters
are
listed on the screen, you could scroll in the relevant
46
Write text
© 2009 Nokia. All rights reserved.