Filter
Top Products
[ 91 ]
Network settings
Network feature setting
This menu allows you to enable or disable various network services
(Call Forwarding, Call Waiting, Send Own Caller ID) through the use
of special feature codes provided to you by your service provider.
You must first store the feature code given to you by your service provider
(unless already pre-programmed) before the feature appears in the menu
or functions properly.
Important!
Only those menu features that have been activated will appear
in the menu; therefore the menu shortcuts in the following sections may
not always reflect the actual position in the menu as described below (or
as shown on page 16).
Storing the feature code
1. Press
Menu 4-5-3
(
Settings
-
Network services
-
Network feature
settings
), then press
Select
.
2. Enter the feature code for the desired feature (for example: -
- to activate Call Forwarding, then press
Select
.
3. To locate the type of Call Forwarding associated with the code, press
Select,
or use the Navi roller and scroll to
Call waiting
or
Send own
caller ID when calling
, and press
Select
.
4. Select the command associated with the feature code you wish to store
(
Activate
,
Cancel
,
Yes
or
No
) and press
Select
to complete the process.
Call forwarding
This network service allows you to forward your incoming calls to another
number (for example, your office number). For more information and
feature codes, contact your service provider.
Once you activate this feature by entering the proper feature code, you
can select one of the following forwarding modes:
Forward
all
calls
,
Forward calls if number busy
,
Forward calls if not
answered
,
Forward
calls if out of reach or phone is off
, and
Cancel all call forwarding.
See
“Call forwarding” on page 37 for a description of the features listed above.