Filter
Top Products
[ 93 ]
Network settings
Send own caller ID when calling
This feature allows you to block caller ID when you call someone (your
number will not be displayed on their caller ID). This feature works on a
per-call basis. Contact your service provider for more details.
This feature is only effective when calling to a number that is equipped
with Caller ID.
Before you can use this service, you must store the feature code in your
phone. See “Storing the feature code” on page 91. Make sure to store the
code in the
No
option.
Blocking your own caller ID
1. Press
Menu
4-5-6
(
Settings - Network services - Send own caller
ID when calling
), and press
Select
.
2. Scroll to
No
(to block number) and press
OK.
3. Enter the number you wish to call (or press
Find
to retrieve the
number from the phone book and press
OK
), then press
Select
.
4. Your phone will attempt to call this number with the feature code you
stored in
Menu 4-5-6
.
Call mode
In certain wireless networks, the
Call mode
submenu option may be
visible under the
Settings - Network services
menu. The following
Call
mode
options are available:
•
Analog
- the phone uses an analog channel to place the call. If an
analog channel is not available, the call may still be placed using a
digital channel. This feature depends on your network.
•
Digital
- the phone uses a digital channel to place the call. If a digital
channel is not available, the call may still be placed using an analog
channel. This feature depends on your network.
•
Analog
&
digital
- the phone uses both digital and analog channels.