Filter
Top Products
[ 43 ]
Advanced calling features
Dialing a number using voice dialing
1. At the Start screen, press and hold the
Names
selection key for 2 seconds.
A tone is heard and
Please speak now
is displayed.
2. After the tone, clearly speak the voice tag that you recorded previously
into the microphone.
Note:
If the voice tag is not recognized by the phone (or if you fail
to speak a tag within 3 seconds after the tone), the message
Name not recognized
will be displayed, and then you are returned
to the Start screen.
3. When the voice tag is recognized:
• the phone book entry will be displayed on the screen for 3 seconds
AND
• the voice tag is replayed (via the earpiece).
• After 3 seconds, the number is dialed.
T
IP
:
When the headset is connected, pressing the headset button
momentarily at the Start screen has the same effect as pressing
Names
for 2 seconds. The alert tones will play through the headset.
Speak the voice tag into the headset microphone. The voice tag will
playback through the headset to confirm your choice.
Working with an existing voice tag
You can listen to an existing voice tag (in case you forgot what you
recorded), re-record a voice tag, or erase an existing tag.
1. At the Start screen, press the
Names
selection key. Scroll to
Voice
tags
and press the roller.
Note:
This option displays a list of only those names/numbers that
have been assigned a voice tag.
2. Scroll to the phone number whose voice tag you want to edit, then
press
Options
.
3. Scroll to either
Playback
,
Change
, or
Erase
, and press the roller.
Note:
If you chose
Change
, press
Start
to begin re-recording. The new
tag that is recorded replaces the old information.