Filter
Top Products
[ 58 ]
• Access codes
These codes may only include the characters 0 to 9. The phone prompts
you to enter the current code and the new code. It also prompts you to
verify the new code.
Note:
Avoid using access codes similar to the emergency numbers, such
as 911, to prevent accidental dialling of the emergency number.
Security code
Your phone will prompt you for a five digit security code for certain features.
These features can be used only after the correct security code has been
successfully entered.
Note:
When entering your security code, ***** will appear on the
display to keep others from viewing your code.
If you make a mistake entering the code, erase the last entered digit by
pressing
Clear
(or press and hold
Clear
to delete all the digits on your display).
Then enter the correct code or press
Back
to exit the current feature.
If you enter an incorrect security code (
Code error
will appear) five times
in a row, your phone won’t accept any entries for the next five minutes.
Your phone’s default security code is 12345. It’s highly recommended
that you change this code at once, write it down, and store it in a safe
place away from your phone.
Changing your security code
1. Press
Menu
4-4-2-3
(
Settings
-
Security settings
-
Access codes
-
Change security code
) and press
Select
.
2. Enter existing (or default) security code and press
OK
.
3. Enter new 5-digit security code and press
OK
.
4. Re-enter your new 5-digit security code for verification, and press
OK
.
5. Phone will display
Security code changed
.
Note:
If you have changed your security code and don’t remember the
new code, contact your service provider. Once you have changed
your security code, the default setting is no longer valid.