Filter
Top Products
[ 120 ]
Reattach the sliding cover
If the plastic part of your phone’s sliding cover accidentally comes off,
reattach it as described below:
1. Make sure the metal frame of the slide is
fully extended and locked into the open
position (the slide will "click" into place).
2. Place the right edge of the plastic slide
cover on the right side of the metal frame
(depressing the microphone contacts in
the process).
3. Rotate the plastic slide cover onto the
metal slide frame. Make sure the middle
snap is secured properly (turn the phone
over to check).
4. Press the left side of the plastic slide cover
onto the metal slide frame until it snaps
into place.
5. Check to confirm that all 3 snaps are
securely fastened.