Filter
Top Products
Basic use
19
3. Basic use
■ Copy contacts from connected devices
You can copy contacts (names and phone numbers) from compatible
mobile devices that you connect to the car kit.
is displayed during copying. Copying may take several minutes,
depending on the number of contacts. While the contacts are being
copied, you cannot use the car kit.
Manual copying
To manually copy contacts of the connected (primary) device if it
supports the PBAP Bluetooth profile or AT commands, in standby mode,
select Menu > Settings > General > Start contact download.
If your device does not support the PBAP Bluetooth profile, but it
supports the OPP Bluetooth profile, in your device, send the contacts as
business cards to the car kit.
If you update contacts in your mobile device, you must copy the
contacts to the car kit again.
Automatic copying
If you have activated the Automatic contact download setting, the car
kit automatically tries to copy the contacts from your device when the
device connects to the car kit. To activate automatic copying, in standby
mode, select Menu > Settings > General > Automatic contact
download > on.
If you have activated automatic copying, each time you connect your
device to the car kit, the contacts saved in the car kit are updated.
■ Calls
During a call, speak towards the display or the external microphone that
is connected to the car kit. For optimal performance, make sure there
are no objects in front of the microphone. During a call, is displayed.