Filter
Top Products
Basic use
20
You can only use the contacts of connected devices if you have copied
them to the car kit.
Make a call
You can use the remote control to make calls only on the primary device.
To make a call on the secondary device, set the device as primary, or
make the call from that device.
Instead of using the remote control, you can also make a call from the
connected device. Use the device in the normal way for calling.
To end the call (or cancel the call attempt), press the end key. If the
battery of the remote control is discharged, press the power key.
Dial a phone number
To use the remote control to enter the phone number, in standby mode,
turn the wheel left, or select Menu > Number entry. To dial a phone
number during a call, select Call options > Number entry.
Select the digits one by one. (To delete the previously entered digit,
press the end key.) When the phone number is displayed, press the call
key, or select .
Call a contact
To call a contact that you have copied to the car kit, in standby mode,
turn the wheel right, or select Menu > Contacts. To access the contacts
list during a call, select Call options > Contacts.
Select the first character of the contact, scroll to the contact, and press
the wheel or the call key. If the contact has several numbers, first select
the desired number, and then press the wheel or the call key.
Call a recently dialled number
To redial the number you last called (if your device supports this feature
with the car kit), press the call key twice when no call is in progress.
To call a recently dialled number, press the call key, scroll to the desired
name or phone number, and press the wheel or the call key.
If the car kit is connected to two devices, the call is made on the primary
device.