Filter
Top Products
Settings
25
4. Settings
■ Connection settings
To manage Bluetooth connections, in standby mode, select Menu >
Settings > Connection and from the following:
• Connection manager — To pair and connect the car kit to a
compatible device, select Pair new device. To connect the car kit to a
previously paired device or disconnect a device, select the device
from the list.
• Multipoint connection — You can connect the car kit to two devices
at the same time. If you select off, the car kit can be connected to
only one device at a time. When the car kit can connect to two
devices, is displayed.
If the car kit can connect to two devices at a time and you use the
redialling or voice dialling features, the call is made on the primary
device.
• Delete paired devices — Select the device that you want to delete
from the list of paired devices. If you select Delete all pairings,
pairings to all devices are deleted, and the car kit must be paired with
a device for use.
■ Display settings
In standby mode, select Menu > Settings > Display and from the
following:
• Brightness
— Select the desired level for display brightness.
• Night mode — Activate or deactivate night mode. If you select on,
the display backlight is dimmer.
• Display color
— Select the colour for the display backlight. To define
your own colour, select Custom, and turn the wheel to set the
amount of red (R), green (G), and blue (B) in the colour. To move
between these tones, press the wheel.
• Auto dimming
— Select the time after which the display is dimmed.