Filter
Top Products
one callers or channel participants, or hide the
address from all callers.
• Show my login status — Define whether your login
to the push to talk server is shown or hidden from
other users.
Connection settings
Select Options > Settings > Connection settings.
Define the following:
• Domain — Enter the domain name obtained from
your service provider.
• Access point name — Select the push to talk access
point.
• Server address — Enter the IP address or domain
name of the push to talk server obtained from your
service provider.
• User name — Enter your user name obtained from
your service provider.
• Password — Enter a password, if required, to log into
the push to talk service. The password is provided by
the service provider.
Log in to push to talk service
If you have set Application start-up on in User
settings, push to talk automatically logs in to the service
when started. If not, you must log in manually.
To log in to a push to talk service, select Options >
Settings > Connection settings, and enter your User
name, Password, Domain, Server address, and Access
point name. Select Options > Switch PTT on.
When the Ringing type setting of your device is set to
Beep once or Silent, or there is an ongoing phone call,
you cannot make or receive push to talk calls.
Push to talk calls
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
Select Options > PTT contacts.
To make a push to talk call, select one or several
contacts from the list, and press the voice key.
Remember to hold the device in front of you during a
push to talk call so you can see the display. The display
informs you when it is your turn to speak. Speak
towards the microphone, and do not cover the
loudspeaker with your hands. Press and hold the voice
key the entire time you are talking. When you have
finished talking, release the key.
To end the push to talk call, press the end key.
When you receive a push to talk call, press the call key
to answer the call or the end key to dismiss the call.
Callback requests
To send a callback request, select Options > PTT
contacts, scroll to the desired contact, and select
Options > Send callback request.
To answer a callback request, select Show to open the
callback request. To make a push to talk call to the
sender, press the voice key.
48
Make calls
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/yukitaka/28303739/rm-89_smailer/en/issue_5/rm-89_smailer_en_5.xml Page 48 Dec 26, 2006 11:32:31 AM
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/yukitaka/28303739/rm-89_smailer/en/issue_5/rm-89_smailer_en_5.xml Page 48 Dec 26, 2006 11:32:31 AM