Filter
Top Products
additional settings. See the extended user guide
on the Web or the device help for more
information.
• WLAN security sett. — Edit the security settings
for the selected WLAN security mode.
• Homepage — Enter the Web address of the page
you want to display as a home page when you
use this access point.
The settings available for editing may vary.
Wireless LAN
Select Menu > Tools > Settings > Connection > Wireless
LAN.
To have your device show wireless LAN availability,
select Show availability.
Tip: You can also scan for networks in range.
If you need to configure the MAC address of your device
to a WLAN router, enter *#62209526# on the device
keypad. The MAC address is shown on the device display.
Cable connection
Install the USB data cable driver to your PC before you
use a cable connection. You can use the Data transfer
without installing the USB data cable drivers.
Select Menu > Connect. > Data cbl..
Using a USB data cable, you can connect your device to
a compatible PC . Connect the USB data cable to the
bottom of the device. To change the device type you
normally connect to your device with the data cable,
press the joystick.
Select from the following:
• Ask on connection — Select whether you want to be
asked for the device type every time you connect the
data cable to your device.
• PC Suite — Connect the PC Suite to your device with
the data cable, and use your device as a modem.
• Data transfer — Access and transfer data such as
music or image files from your computer using the
data cable connection. To use the Data transfer
mode, make sure that you have not selected USB as
a connection type in the Manage connections
settings in Nokia PC Suite. Insert a memory card to
your device, connect the device to a compatible
computer with the USB data cable, and select Data
transfer when the device asks which mode is used.
In this mode, your device acts as a mass storage
device and you can see it as a removable hard drive
in your computer. The device will switch into the
Offline profile if this is selected. End the connection
from the PC (for example, from an Unplug or Eject
Hardware wizard in Windows) to avoid damaging
the memory card. After you end the connection, the
device returns to the profile in which it was before
using the data transfer mode.
• IP passthrough — Select an access point through
which to transfer data using the Internet protocol.
To save your selection, select Back.
62
Connectivity
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/yukitaka/28303739/rm-89_smailer/en/issue_5/rm-89_smailer_en_5.xml Page 62 Dec 26, 2006 11:32:31 AM
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/yukitaka/28303739/rm-89_smailer/en/issue_5/rm-89_smailer_en_5.xml Page 62 Dec 26, 2006 11:32:31 AM