Filter
Top Products
Tools
73
■ Radio
The FM radio depends on an antenna other than the wireless devices
antenna. A compatible headset or enhancement needs to be attached to
the device for the FM radio to function properly.
Warning: Listen to music at a moderate level. Continuous exposure to high
volume may damage your hearing. Do not hold the device near your ear
when the loudspeaker is in use, because the volume may be extremely loud.
Select Menu > Tools > Radio. To use the graphical keys , , , or
on the display, scroll left or right to the desired key, and select it.
To change the volume, press the volume keys.
Save radio channels
1. To start the channel search, select and hold or . To change
the radio frequency in 0.05 MHz steps, briefly press or .
2. To save the channel to a memory location, 1 to 9, press and hold the
corresponding number key. To save the channel in the memory
location from 10 to 20, press briefly 1 or 2, and press and hold the
desired number key, 0 to 9.
3. Enter the name of the channel, and select OK.
Listen to the radio
Select Menu > Tools > Radio. To scroll to the desired channel, select
or , or press the headset key. To select a radio channel location,
briefly press the corresponding number keys.
Select Options and from the following options:
Turn off—to turn off the radio
Save channel—to save a new channel and enter the channels name
Channels—to select the list of saved channels. To delete or rename a
channel, scroll to the desired channel, and select Options > Delete
channel or Rename.
Mono output or Stereo output—to listen to the radio in monophonic
sound or in stereo
6102i_EN_ESv1_BIL_9248318_UG.book Page 73 Thursday, March 16, 2006 1:38 PM